Trade Select™ THERMALBRANE 6.5™ is a reflective membrane made with high density XPE foam. Trade Select™ THERMALBRANE 6.5™ is an excellent barrier to radiant heat, enhancing the energy performance and thermal comfort of a building, and protects against water and air infiltration.
Why Trade Select™ ThermalBrane 6.5™ ?
- Three-in-one reflective insulation, thermal break & vapour barrier
- Multi-purpose: can be used on roofs, walls and floors
- Compression resistant
- Fibre-free and non-allergenic
- Material R-value R0.16
- Suitable for bushfire prone areas
- Tile roof sarking
- Metal roof sarking
- Premium wall wrap
- Framed sub-floor insulation
- Steel framed construction
Bushfire Attack Levels
For use in roof systems BAL– LOW to BAL – 40 and wall systems BAL – LOW to BAL – FZ to comply with AS 3959—2009 Construction of buildings in bushfire prone areas.
Trade Select™ THERMALBRANE 6.5™complies with AS/NZS 4200.1:1994 and AS/NZS 4859.1:2002 and therefore satisfies all general requirements of the National Construction Code and Building Code of Australia.
Trade Select™ THERMALBRANE 6.5™ does NOT achieve R0.2 material R-value, as required by the NCC/BCA when a metal framing member directly connects the exterior cladding to the internal lining, or when no ceiling is installed, in a residence or in a conditioned non-residential building.
In many other situations, such as steel-framed industrial buildings,Trade Select™ THERMALBRANE 6.5™ will provide a sufficient thermal break to prevent condensation.
(Consult a professional engineer for site-specific recommendations.)
How to Specify
See specification notes for Trade Select™ THERMALBRANE 6.5™